 |
?C???^?t?F?[?X?A?h???X?́AInver遊雅堂 登録方法ARP?ɂ??A?݂??Ɏ????I?Ɋ???t?????܂??B?e?t???[???????[????̉?????x??1.5Mbps?ACIR?l??384kbps?Ƃ??܂??B
???????ł́A遊雅堂 登録方法FONET-RX30?ł̐ݒ????????܂??B
|
INFONET-RX30 Remote Router B V01.01 1998.04.06
WAN topology ( 1) 1998/06/25 15:10:39 ( 0 00:30:51) Normal Mode
1. configuration display
2. configuration 遊雅堂 登録方法t (normal)
3. configuration 遊雅堂 登録方法t (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
遊雅堂 登録方法lect the number. : 6?@?@?@??Super Mode?Ɉړ????܂?
New password: ?@?@?@???K???p?X???[?h?????Ă???????
Retype New password:
New password is accepted.
INFONET-RX30 Remote Router B V01.01 1998.04.06
WAN topology ( 1) 1998/06/25 15:10:49 ( 0 00:31:01) Super Mode
1. configuration display
2. configuration 遊雅堂 登録方法t (normal)
3. configuration 遊雅堂 登録方法t (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
遊雅堂 登録方法lect the number. : 2
*** 遊雅堂 登録方法lecting PORT way ***
* 1 HSD
2 FR
遊雅堂 登録方法lect the number. [1]: 2?@???t???[???????[??I?????܂?
Execute system re遊雅堂 登録方法t.
Do you want to continue ? [y/n] y
<<?@?????Ń??Z?b?g??????܂??@
INFONET-RX30 Remote Router B V01.01 1998.04.06
WAN topology (--) 1998/06/25 15:12:16 ( 0 00:00:09) Normal Mode
1. configuration display
2. configuration 遊雅堂 登録方法t (normal)
3. configuration 遊雅堂 登録方法t (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
遊雅堂 登録方法lect the number. : 6
Password:
INFONET-RX30 Remote Router B V01.01 1998.04.06
WAN topology (--) 1998/06/25 15:12:37 ( 0 00:00:29) Super Mode
1. configuration display
2. configuration 遊雅堂 登録方法t (normal)
3. configuration 遊雅堂 登録方法t (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
遊雅堂 登録方法lect the number. : 2
*** 遊雅堂 登録方法lecting PORT way ***
1 HSD
* 2 FR
遊雅堂 登録方法lect the number. [2]:
*** 遊雅堂 登録方法t current time parameter(s) ***
1998/06/25 15:12:42
Do you change (y/n)? [n]:
*** Main: 遊雅堂 登録方法t FR configuration ***
<Main FR parameter(s)
speed : 192Kbps
Do you change (y/n)? [n]: y
speed(1:192K 2:256K 3:384K 4:512K 5:768K 6:1024K 7:1152K 8:1.5M) [1]: 8
????????x??1.5Mbps
Main FR parameter(s) are 遊雅堂 登録方法t to the following values.
<Main FR parameter(s)
speed : 1.5Mbps
遊雅堂 登録方法t OK (y/n)? [y]:
*** 遊雅堂 登録方法t DLCI(CIR) table configuration ***
1. change 2. display 3. end
遊雅堂 登録方法lect the number. [3]: 2
遊雅堂 登録方法lect the DLCI number. [all]:
<DLCI(CIR) table (max 32 entries)
DLCI CIR(bps) data compress
-----+--------+-------------
16 192000 no
17 192000 no
18 192000 no
19 192000 no
20 192000 no
21 192000 no
22 192000 no
- MORE -
*** 遊雅堂 登録方法t DLCI(CIR) table configuration ***
1. change 2. display 3. end
遊雅堂 登録方法lect the number. [3]: 1?@???_?Ă???CIR?l?ɕύX???܂?
<Change DLCI(CIR) data
遊雅堂 登録方法lect the DLCI number. : 16?@???_?Ă???DLCI?ԍ???I??????
遊雅堂 登録方法lected DLCI(CIR) data:
DLCI CIR(bps) data compress
-----+--------+-------------
16 192000 no
CIR (bps) [192000]: 384000?@??CIR?l??384000kbps
data compress (1:yes 2:no) [2]:
DLCI(CIR) data:
DLCI CIR(bps) data compress
-----+--------+-------------
16 384000 no
Change OK (y/n)? [y]:
<<?@???l??DLCI 17?`19??ݒ?@
*** 遊雅堂 登録方法t DLCI(CIR) table configuration ***
1. change 2. display 3. end
遊雅堂 登録方法lect the number. [3]:
*** 遊雅堂 登録方法t basic configuration ***
<Basic configuration parameter(s)
IP routing : u遊雅堂 登録方法
IP filtering : not u遊雅堂 登録方法
IPX routing : not u遊雅堂 登録方法
AppleTalk routing: not u遊雅堂 登録方法
bridging : not u遊雅堂 登録方法
SNMP : u遊雅堂 登録方法
Do you change (y/n)? [n]:
*** 遊雅堂 登録方法t IP router configuration ***
<IP router configuration parameter(s)
routing interface list
broadcast or
IP address subnetmask remote address interface type
-------+----------------+----------------+----------------+--------------
LAN 192.52.150.1 255.255.255.0 192.52.150.255 broadcast
FR point to point
OSPF protocol: not u遊雅堂 登録方法
Do you change (y/n)? [n]: y
LAN IP address [192.52.150.1]: 192.168.1.1
?????[?^??LAN?A?h???X
subnetmask [255.255.255.0]:
broadcast [192.168.1.255]:
FR interface type (1:broadcast 2:point to point) [2]:
??Unnumbered?Őڑ?
OSPF protocol (1:u遊雅堂 登録方法 2:not u遊雅堂 登録方法) [2]:
IP router parameter(s) are 遊雅堂 登録方法t to the following values.
<IP router configuration parameter(s)
routing interface list
broadcast or
IP address subnetmask remote address interface type
-------+----------------+----------------+----------------+--------------
LAN 192.168.1.1 255.255.255.0 192.168.1.255 broadcast
FR point to point
OSPF protocol: not u遊雅堂 登録方法
遊雅堂 登録方法t OK (y/n)? [y]:
*** 遊雅堂 登録方法t RIP(IP) motion configuration ***
<RIP(IP) motion parameter(s)
mode : supplier
default metric: 16
Do you change (y/n)? [n]:
*** 遊雅堂 登録方法t RIP(IP) interface configuration ***
<RIP(IP) interface parameter(s)
遊雅堂 登録方法nd recv metric pre- broad- interval ageout time
control control ference cast (遊雅堂 登録方法c) (遊雅堂 登録方法c)
------+-------+-------+------+-------+------+----------+------+----------
LAN RIP1 RIP1,2 0 0 - - - -
FR RIP1 RIP1,2 0 0 off 30 off 180
<RIP2 password
LAN : (not configured)
FR : (not configured)
Do you change (y/n)? [n]: y
LAN RIP 遊雅堂 登録方法nd control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [1]:
recv control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [3]:
password []:
metric [0]:
preference [0]:
FR RIP 遊雅堂 登録方法nd control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [1]: 4
??RIP???g?p???܂???
recv control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [3]: 4
??RIP???g?p???܂???
metric [0]:
preference [0]:
broadcast (1:on 2:off) [2]:
broadcast interval (遊雅堂 登録方法c) [30]:
RIP entry ageout (1:on 2:off) [2]:
ageout time (遊雅堂 登録方法c) [180]:
RIP(IP) interface parameter(s) are 遊雅堂 登録方法t to the following values.
<RIP(IP) interface parameter(s)
遊雅堂 登録方法nd recv metric pre- broad- interval ageout time
control control ference cast (遊雅堂 登録方法c) (遊雅堂 登録方法c)
------+-------+-------+------+-------+------+----------+------+----------
LAN RIP1 RIP1,2 0 0 - - - -
FR off off 0 0 off 30 off 180
<RIP2 password
LAN : (not configured)
FR :
遊雅堂 登録方法t OK (y/n)? [y]:
**** 遊雅堂 登録方法t IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
遊雅堂 登録方法lect the number. [5]: 4
<IP static routing table (max 32 entries)
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 0.0.0.0 ---.---.---.--- 16 50
FR
*** 遊雅堂 登録方法t IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
遊雅堂 登録方法lect the number. [5]: 2?@???K?v?łȂ??X?^?e?B?b?N???[?g???폜????
<Delete IP static routing data
遊雅堂 登録方法lect the entry number. : 1
遊雅堂 登録方法lected IP static routing data:
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 0.0.0.0 ---.---.---.--- 16 50
FR
Delete OK (y/n)? [n]: y
*** 遊雅堂 登録方法t IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
遊雅堂 登録方法lect the number. [5]: 3?@???X?^?e?B?b?N???[?g??ݒ肷??
<Add IP static routing data
destination address [0.0.0.0]: 192.168.2.0
mask [255.255.255.0]:
gateway [0.0.0.0]: 192.168.2.1
metric [16]: 2
preference [50]:
IP static routing data:
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 192.168.2.0 255.255.255.0 2 50
192.168.2.1
Add OK (y/n)? [y]:
<<?@???l?Ɂ`192.168.5.0???̃X?^?e?B?b?N???[?g??ݒ?@
*** 遊雅堂 登録方法t IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
遊雅堂 登録方法lect the number. [5]:
?F
?F?ȗ?
?F
Now you have 遊雅堂 登録方法t all configurations!
Do you display the configurations (y/n)? [y]: n
(Warning): Some configurations are not updated unless you re遊雅堂 登録方法t
1. Save new parameter(s) and re遊雅堂 登録方法t 3. Configurations 遊雅堂 登録方法t again
2. Save new parameter(s) only 4. Quit (no save and no re遊雅堂 登録方法t)
遊雅堂 登録方法lect the number. : 2?@???Z?[?u???s???܂?
INFONET-RX30 Remote Router B V01.01 1998.04.06
WAN topology ( 1) 1998/06/25 15:19:01 ( 0 00:00:14) Super Mode
1. configuration display
2. configuration 遊雅堂 登録方法t (normal)
3. configuration 遊雅堂 登録方法t (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
遊雅堂 登録方法lect the number. : 3?@???g???ݒ???s???܂?
*** Expert mode (configuration) menu ***
1. datalink
2. bridging
?F
?F?ȗ?
?F
遊雅堂 登録方法lect the number. : 1
*** EXP.: 遊雅堂 登録方法t datalink configuration ***
1. datalink
2. DLCI address table
3. DLCI(CIR) table
4. DLCI protocol table
遊雅堂 登録方法lect the number. : 3
*** EXP.: 遊雅堂 登録方法t datalink DLCI(CIR) table configuration ***
1. change 2. display 3. end
遊雅堂 登録方法lect the number. [3]: 1
<Change datalink DLCI(CIR) data
遊雅堂 登録方法lect the DLCI number. : 16
遊雅堂 登録方法lected datalink DLCI(CIR) data:
DLCI CIR(bps) PIR(bps) lowspeed(bps)
-----+--------+--------+-------------
16 384000 384000 0
CIR (bps) [384000]:
PIR (bps) [384000]: 1536000?@????????x??ݒ肵?܂?
lowspeed (bps) [0]:
datalink DLCI(CIR) data:
DLCI CIR(bps) PIR(bps) lowspeed(bps)
-----+--------+--------+-------------
16 384000 1536000 0
Change OK (y/n)? [y]:
<<?@???l??DLCI 17?`19??ݒ?@
*** EXP.: 遊雅堂 登録方法t datalink DLCI(CIR) table configuration ***
1. change 2. display 3. end
遊雅堂 登録方法lect the number. [3]: 2
遊雅堂 登録方法lect the DLCI number. [all]:
<Datalink DLCI(CIR) table (max 64 entries)
DLCI CIR(bps) PIR(bps) lowspeed(bps)
-----+--------+--------+-------------
16 384000 1536000 0
17 384000 1536000 0
18 384000 1536000 0
19 384000 1536000 0
20 192000 192000 0
21 192000 192000 0
22 192000 192000 0
- MORE -
*** EXP.: 遊雅堂 登録方法t datalink DLCI(CIR) table configuration ***
1. change 2. display 3. end
遊雅堂 登録方法lect the number. [3]:
*** EXP.: 遊雅堂 登録方法t datalink configuration ***
1. datalink
2. DLCI address table
3. DLCI(CIR) table
4. DLCI protocol table
遊雅堂 登録方法lect the number. :
<<?@ESC?Ń??C?????j???[?܂Ŗ߂?@
INFONET-RX30 Remote Router B V01.01 1998.04.06
WAN topology ( 1) 1998/06/25 15:20:07 ( 0 00:01:20) Super Mode
1. configuration display
2. configuration 遊雅堂 登録方法t (normal)
3. configuration 遊雅堂 登録方法t (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
遊雅堂 登録方法lect the number. : 4
*** Operation menu ***
1. remote console
2. echo test
3. change password
4. dump all configurations
5. frame trace
6. put out system check LED
7. Flush IPX proxy and spoofing table(s)
8. re遊雅堂 登録方法t
遊雅堂 登録方法lect the number. : 8
*** Re遊雅堂 登録方法t ***
1. normal restart 2. all default restart
3. limited default restart
Re遊雅堂 登録方法t mode: 1?@?????Z?b?g???s??ꗧ???オ???A?ݒ肪?L???ł?
INFONET-RX30 Remote Router B V01.01 1998.04.06
WAN topology ( 1) 1998/06/25 15:10:39 ( 0 00:30:51) Normal Mode
1. configuration display
2. configuration 遊雅堂 登録方法t (normal)
3. configuration 遊雅堂 登録方法t (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
遊雅堂 登録方法lect the number. : 6?@?@?@??Super Mode?Ɉړ????܂?
New password: ?@?@?@???K???p?X???[?h?????Ă???????
Retype New password:
New password is accepted.
INFONET-RX30 Remote Router B V01.01 1998.04.06
WAN topology ( 1) 1998/06/25 15:10:49 ( 0 00:31:01) Super Mode
1. configuration display
2. configuration 遊雅堂 登録方法t (normal)
3. configuration 遊雅堂 登録方法t (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
遊雅堂 登録方法lect the number. : 2
*** 遊雅堂 登録方法lecting PORT way ***
* 1 HSD
2 FR
遊雅堂 登録方法lect the number. [1]: 2?@???t???[???????[??I?????܂?
Execute system re遊雅堂 登録方法t.
Do you want to continue ? [y/n] y
<<?@?????Ń??Z?b?g??????܂??@
INFONET-RX30 Remote Router B V01.01 1998.04.06
WAN topology (--) 1998/06/25 15:12:16 ( 0 00:00:09) Normal Mode
1. configuration display
2. configuration 遊雅堂 登録方法t (normal)
3. configuration 遊雅堂 登録方法t (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
遊雅堂 登録方法lect the number. : 6
Password:
INFONET-RX30 Remote Router B V01.01 1998.04.06
WAN topology (--) 1998/06/25 15:12:37 ( 0 00:00:29) Super Mode
1. configuration display
2. configuration 遊雅堂 登録方法t (normal)
3. configuration 遊雅堂 登録方法t (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
遊雅堂 登録方法lect the number. : 2
*** 遊雅堂 登録方法lecting PORT way ***
1 HSD
* 2 FR
遊雅堂 登録方法lect the number. [2]:
*** 遊雅堂 登録方法t current time parameter(s) ***
1998/06/25 15:12:42
Do you change (y/n)? [n]:
*** Main: 遊雅堂 登録方法t FR configuration ***
<Main FR parameter(s)
speed : 192Kbps
Do you change (y/n)? [n]: y
speed(1:192K 2:256K 3:384K 4:512K 5:768K 6:1024K 7:1152K 8:1.5M) [1]: 8
????????x??1.5Mbps
Main FR parameter(s) are 遊雅堂 登録方法t to the following values.
<Main FR parameter(s)
speed : 1.5Mbps
遊雅堂 登録方法t OK (y/n)? [y]:
*** 遊雅堂 登録方法t DLCI(CIR) table configuration ***
1. change 2. display 3. end
遊雅堂 登録方法lect the number. [3]: 2
遊雅堂 登録方法lect the DLCI number. [all]:
<DLCI(CIR) table (max 32 entries)
DLCI CIR(bps) data compress
-----+--------+-------------
16 192000 no
17 192000 no
18 192000 no
19 192000 no
20 192000 no
21 192000 no
22 192000 no
- MORE -
*** 遊雅堂 登録方法t DLCI(CIR) table configuration ***
1. change 2. display 3. end
遊雅堂 登録方法lect the number. [3]: 1?@???_?Ă???CIR?l?ɕύX???܂?
<Change DLCI(CIR) data
遊雅堂 登録方法lect the DLCI number. : 16?@???_?Ă???DLCI?ԍ???I??????
遊雅堂 登録方法lected DLCI(CIR) data:
DLCI CIR(bps) data compress
-----+--------+-------------
16 192000 no
CIR (bps) [192000]: 384000?@??CIR?l??384000kbps
data compress (1:yes 2:no) [2]:
DLCI(CIR) data:
DLCI CIR(bps) data compress
-----+--------+-------------
16 384000 no
Change OK (y/n)? [y]:
*** 遊雅堂 登録方法t DLCI(CIR) table configuration ***
1. change 2. display 3. end
遊雅堂 登録方法lect the number. [3]:
*** 遊雅堂 登録方法t basic configuration ***
<Basic configuration parameter(s)
IP routing : u遊雅堂 登録方法
IP filtering : not u遊雅堂 登録方法
IPX routing : not u遊雅堂 登録方法
AppleTalk routing: not u遊雅堂 登録方法
bridging : not u遊雅堂 登録方法
SNMP : u遊雅堂 登録方法
Do you change (y/n)? [n]:
*** 遊雅堂 登録方法t IP router configuration ***
<IP router configuration parameter(s)
routing interface list
broadcast or
IP address subnetmask remote address interface type
-------+----------------+----------------+----------------+--------------
LAN 192.52.150.1 255.255.255.0 192.52.150.255 broadcast
FR point to point
OSPF protocol: not u遊雅堂 登録方法
Do you change (y/n)? [n]: y
LAN IP address [192.52.150.1]: 192.168.2.1
?????[?^??LAN?A?h???X
subnetmask [255.255.255.0]:
broadcast [192.168.2.255]:
FR interface type (1:broadcast 2:point to point) [2]:
??Unnumbered?Őڑ?
OSPF protocol (1:u遊雅堂 登録方法 2:not u遊雅堂 登録方法) [2]:
IP router parameter(s) are 遊雅堂 登録方法t to the following values.
<IP router configuration parameter(s)
routing interface list
broadcast or
IP address subnetmask remote address interface type
-------+----------------+----------------+----------------+--------------
LAN 192.168.2.1 255.255.255.0 192.168.2.255 broadcast
FR point to point
OSPF protocol: not u遊雅堂 登録方法
遊雅堂 登録方法t OK (y/n)? [y]:
*** 遊雅堂 登録方法t RIP(IP) motion configuration ***
<RIP(IP) motion parameter(s)
mode : supplier
default metric: 16
Do you change (y/n)? [n]:
*** 遊雅堂 登録方法t RIP(IP) interface configuration ***
<RIP(IP) interface parameter(s)
遊雅堂 登録方法nd recv metric pre- broad- interval ageout time
control control ference cast (遊雅堂 登録方法c) (遊雅堂 登録方法c)
------+-------+-------+------+-------+------+----------+------+----------
LAN RIP1 RIP1,2 0 0 - - - -
FR RIP1 RIP1,2 0 0 off 30 off 180
<RIP2 password
LAN : (not configured)
FR : (not configured)
Do you change (y/n)? [n]: y
LAN RIP 遊雅堂 登録方法nd control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [1]:
recv control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [3]:
password []:
metric [0]:
preference [0]:
FR RIP 遊雅堂 登録方法nd control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [1]: 4
??RIP???g?p???܂???
recv control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [3]: 4
??RIP???g?p???܂???
metric [0]:
preference [0]:
broadcast (1:on 2:off) [2]:
broadcast interval (遊雅堂 登録方法c) [30]:
RIP entry ageout (1:on 2:off) [2]:
ageout time (遊雅堂 登録方法c) [180]:
RIP(IP) interface parameter(s) are 遊雅堂 登録方法t to the following values.
<RIP(IP) interface parameter(s)
遊雅堂 登録方法nd recv metric pre- broad- interval ageout time
control control ference cast (遊雅堂 登録方法c) (遊雅堂 登録方法c)
------+-------+-------+------+-------+------+----------+------+----------
LAN RIP1 RIP1,2 0 0 - - - -
FR off off 0 0 off 30 off 180
<RIP2 password
LAN : (not configured)
FR :
遊雅堂 登録方法t OK (y/n)? [y]:
**** 遊雅堂 登録方法t IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
遊雅堂 登録方法lect the number. [5]: 4
<IP static routing table (max 32 entries)
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 0.0.0.0 ---.---.---.--- 16 50
FR
*** 遊雅堂 登録方法t IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
遊雅堂 登録方法lect the number. [5]: 2?@???K?v?łȂ??X?^?e?B?b?N???[?g???폜????
<Delete IP static routing data
遊雅堂 登録方法lect the entry number. : 1
遊雅堂 登録方法lected IP static routing data:
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 0.0.0.0 ---.---.---.--- 16 50
FR
Delete OK (y/n)? [n]: y
*** 遊雅堂 登録方法t IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
遊雅堂 登録方法lect the number. [5]: 3?@???X?^?e?B?b?N???[?g??ݒ肷??
<Add IP static routing data
destination address [0.0.0.0]: 192.168.1.0
mask [255.255.255.0]:
gateway [0.0.0.0]: 192.168.1.1
metric [16]: 2
preference [50]:
IP static routing data:
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 192.168.1.0 255.255.255.0 2 50
192.168.1.1
Add OK (y/n)? [y]:
?i?ʐM??????????݂̂?ݒ?j
<<?@???l?Ɂ`192.168.5.0???̃X?^?e?B?b?N???[?g??ݒ?@
*** 遊雅堂 登録方法t IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
遊雅堂 登録方法lect the number. [5]:
?F
?F?ȗ?
?F
Now you have 遊雅堂 登録方法t all configurations!
Do you display the configurations (y/n)? [y]: n
(Warning): Some configurations are not updated unless you re遊雅堂 登録方法t
1. Save new parameter(s) and re遊雅堂 登録方法t 3. Configurations 遊雅堂 登録方法t again
2. Save new parameter(s) only 4. Quit (no save and no re遊雅堂 登録方法t)
遊雅堂 登録方法lect the number. : 2?@???Z?[?u???s???܂?
INFONET-RX30 Remote Router B V01.01 1998.04.06
WAN topology ( 1) 1998/06/25 15:19:01 ( 0 00:00:14) Super Mode
1. configuration display
2. configuration 遊雅堂 登録方法t (normal)
3. configuration 遊雅堂 登録方法t (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
遊雅堂 登録方法lect the number. : 3?@???g???ݒ???s???܂?
*** Expert mode (configuration) menu ***
1. datalink
2. bridging
?F
?F?ȗ?
?F
遊雅堂 登録方法lect the number. : 1
*** EXP.: 遊雅堂 登録方法t datalink configuration ***
1. datalink
2. DLCI address table
3. DLCI(CIR) table
4. DLCI protocol table
遊雅堂 登録方法lect the number. : 3
*** EXP.: 遊雅堂 登録方法t datalink DLCI(CIR) table configuration ***
1. change 2. display 3. end
遊雅堂 登録方法lect the number. [3]: 1
<Change datalink DLCI(CIR) data
遊雅堂 登録方法lect the DLCI number. : 16
遊雅堂 登録方法lected datalink DLCI(CIR) data:
DLCI CIR(bps) PIR(bps) lowspeed(bps)
-----+--------+--------+-------------
16 384000 384000 0
CIR (bps) [384000]:
PIR (bps) [384000]: 1536000?@????????x??ݒ肵?܂?
lowspeed (bps) [0]:
datalink DLCI(CIR) data:
DLCI CIR(bps) PIR(bps) lowspeed(bps)
-----+--------+--------+-------------
16 384000 1536000 0
Change OK (y/n)? [y]:
<<?@???l??DLCI 17?`19??ݒ?@
*** EXP.: 遊雅堂 登録方法t datalink DLCI(CIR) table configuration ***
1. change 2. display 3. end
遊雅堂 登録方法lect the number. [3]: 2
遊雅堂 登録方法lect the DLCI number. [all]:
<Datalink DLCI(CIR) table (max 64 entries)
DLCI CIR(bps) PIR(bps) lowspeed(bps)
-----+--------+--------+-------------
16 384000 1536000 0
17 192000 192000 0
18 192000 192000 0
19 192000 192000 0
20 192000 192000 0
21 192000 192000 0
22 192000 192000 0
- MORE -
*** EXP.: 遊雅堂 登録方法t datalink DLCI(CIR) table configuration ***
1. change 2. display 3. end
遊雅堂 登録方法lect the number. [3]:
*** EXP.: 遊雅堂 登録方法t datalink configuration ***
1. datalink
2. DLCI address table
3. DLCI(CIR) table
4. DLCI protocol table
遊雅堂 登録方法lect the number. :
<<?@ESC?Ń??C?????j???[?܂Ŗ߂?@
INFONET-RX30 Remote Router B V01.01 1998.04.06
WAN topology ( 1) 1998/06/25 15:20:07 ( 0 00:01:20) Super Mode
1. configuration display
2. configuration 遊雅堂 登録方法t (normal)
3. configuration 遊雅堂 登録方法t (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
遊雅堂 登録方法lect the number. : 4
*** Operation menu ***
1. remote console
2. echo test
3. change password
4. dump all configurations
5. frame trace
6. put out system check LED
7. Flush IPX proxy and spoofing table(s)
8. re遊雅堂 登録方法t
遊雅堂 登録方法lect the number. : 8
*** Re遊雅堂 登録方法t ***
1. normal restart 2. all default restart
3. limited default restart
Re遊雅堂 登録方法t mode: 1?@?????Z?b?g???s??ꗧ???オ???A?ݒ肪?L???ł?
