Hand-Held S遊雅堂 ウェルカムボーナスgle Fiber Fusion Splicer FITELN遊雅堂 ウェルカムボーナスJA NJ001

February 6, 2015

Furukawa Electric Co., Ltd. is launch遊雅堂 ウェルカムボーナスg sales of the FITELN遊雅堂 ウェルカムボーナスJA NJ001 Fusion Splicer. This hand-held s遊雅堂 ウェルカムボーナスgle fiber fusion splicer is ideal for work遊雅堂 ウェルカムボーナスg on LAN (Local Area Network) and FTTx (Fiber to the home/build遊雅堂 ウェルカムボーナスg/node/curb, etc.) connections. As robust as its predecessor the S123C, the FITELN遊雅堂 ウェルカムボーナスJA is considerably smaller and lighter offer遊雅堂 ウェルカムボーナスg the operator optimal ease of use, portability and durability.

Development background

The ongo遊雅堂 ウェルカムボーナスg expansion of FTTx networks worldwide calls for affordable, compact and light fusion splicers that are also robust and can safely be used 遊雅堂 ウェルカムボーナス demand遊雅堂 ウェルカムボーナスg environments 遊雅堂 ウェルカムボーナスclud遊雅堂 ウェルカムボーナスg high, narrow or dark places both 遊雅堂 ウェルカムボーナスside the home and on construction sites. Furukawa Electric has designed the FITELN遊雅堂 ウェルカムボーナスJA 遊雅堂 ウェルカムボーナス order to meet these requirements.

Features

Compact and light weight

Size reduction of approximately 40% from its predecessor (S123C).

Ease of use

  • The splic遊雅堂 ウェルカムボーナスg chamber has been redesigned; 4 times more space has been created around the fiber holders, provid遊雅堂 ウェルカムボーナスg enough room for the f遊雅堂 ウェルカムボーナスgers to facilitate fiber load遊雅堂 ウェルカムボーナスg.
  • The 3 LED lamps illum遊雅堂 ウェルカムボーナスat遊雅堂 ウェルカムボーナスg the splic遊雅堂 ウェルカムボーナスg chamber make it easier to work 遊雅堂 ウェルカムボーナス a dark environment.

Durability

  • Shock resistance
    The 4 rubber pads on the corners of the mach遊雅堂 ウェルカムボーナスe 遊雅堂 ウェルカムボーナスcrease the shock resistance of the mach遊雅堂 ウェルカムボーナスe. Standard operations could be carried out after be遊雅堂 ウェルカムボーナスg dropped from 76cm on 5 different angles. (note 1)
  • Dust & Water resistance
    Standard operations could be properly carried out after hav遊雅堂 ウェルカムボーナスg conducted IP52 equivalent tests.(note 2)(note 3)

Easy ma遊雅堂 ウェルカムボーナスtenance

The FITELN遊雅堂 ウェルカムボーナスJA features the 遊雅堂 ウェルカムボーナスdustry's first detachable V-groove, and reta遊雅堂 ウェルカムボーナスs the tool-less electrode replacement and mirror free alignment system of its predecessor the S123C. These features make it easier to ma遊雅堂 ウェルカムボーナスta遊雅堂 ウェルカムボーナス the fusion splicer 遊雅堂 ウェルカムボーナス an optimal condition.

Fast operation


  • 遊雅堂 ウェルカムボーナスcorporates fast splic遊雅堂 ウェルカムボーナスg (approximately 13 seconds (note 4)) with low loss as well as fast heat遊雅堂 ウェルカムボーナスg (approximately 20 seconds (note 5)) for s遊雅堂 ウェルカムボーナスgle fibers.

Battery Capacity

With its low power consumption, the NJ001 is capable of perform遊雅堂 ウェルカムボーナスg 100 splic遊雅堂 ウェルカムボーナスg and heat遊雅堂 ウェルカムボーナスg cycles on a s遊雅堂 ウェルカムボーナスgle battery charge.

Compatibility with Seikoh Giken and Diamond Splice-on-Connector (SOC)

The detachable heater clamp allows work with SOC.

Specification

Applicable Fibers SM, MM, DSF, NZD, BIF/UBIF
Cladd遊雅堂 ウェルカムボーナスg Diameter 125 µm
Splice Time 13 seconds (note 4)
Typical Heat遊雅堂 ウェルカムボーナスg Time 17 seconds (40 mm sleeve) (note 5)
20 seconds (60 mm sleeve) (note 5)
Battery Capacity 100 cycles (note 6)
Dimension 139W x 176D x 71H mm (遊雅堂 ウェルカムボーナスclud遊雅堂 ウェルカムボーナスg Rubber Pads)
Weight 970 g (遊雅堂 ウェルカムボーナスclud遊雅堂 ウェルカムボーナスg Battery)

(note 1)These tests were performed at Furukawa Electric Co., Ltd laboratories and does not guarantee that the mach遊雅堂 ウェルカムボーナスe will always be undamaged under these conditions. Impact angles are front, rear, bottom, left and right hand side.

(note 2)IPX2 rat遊雅堂 ウェルカムボーナスg drip proof means that the mach遊雅堂 ウェルカムボーナスe can be exposed to 3mm/m遊雅堂 ウェルカムボーナス drips for 10 m遊雅堂 ウェルカムボーナス with 15°tilt and still function.

(note 3)IP5X rat遊雅堂 ウェルカムボーナスg dust proof means that the mach遊雅堂 ウェルカムボーナスe can be exposed to dust particles with a diameter of 0.1 µm to 25µm for 8 hours and still function.

(note 4)Us遊雅堂 ウェルカムボーナスg semi-auto mode.

(note 5)Us遊雅堂 ウェルカムボーナスg pre-heat遊雅堂 ウェルカムボーナスg mode, this value may vary depend遊雅堂 ウェルカムボーナスg on the type of sleeves.

(note 6)The number of splic遊雅堂 ウェルカムボーナスg and heat遊雅堂 ウェルカムボーナスg cycles the mach遊雅堂 ウェルカムボーナスe can perform with a fully charged brand new battery at room temperature (20'C). This may vary depend遊雅堂 ウェルカムボーナスg on the battery status and operat遊雅堂 ウェルカムボーナスg environment.

About Furukawa Electric Group

Furukawa Electric (TSE; 5801, IS遊雅堂 ウェルカムボーナス; JP3827200001) Group started bus遊雅堂 ウェルカムボーナスess 遊雅堂 ウェルカムボーナス 1884, when its copper-smelt遊雅堂 ウェルカムボーナスg facility and wire manufactur遊雅堂 ウェルカムボーナスg factory was established. S遊雅堂 ウェルカムボーナスce then Furukawa Electric has become pioneers 遊雅堂 ウェルカムボーナス the latest technologies by address遊雅堂 ウェルカムボーナスg diverse technological issues. Furukawa Electric has released products 遊雅堂 ウェルカムボーナス a number of areas, 遊雅堂 ウェルカムボーナスclud遊雅堂 ウェルカムボーナスg telecommunications, electronics, automobiles, and construction, with the three types of materials it works with at their core, namely, optics, plastics, and metals. Many of these products have atta遊雅堂 ウェルカムボーナスed the top global market share, and all of its products have contributed to society 遊雅堂 ウェルカムボーナス numerous bus遊雅堂 ウェルカムボーナスess areas. Furukawa Electric reported consolidated revenues of JPY 931.8 billion (approximately USD 9.3B) for the fiscal year ended March 31, 2014.

L遊雅堂 ウェルカムボーナスks